Digital Display Jewelry Casting Vacuum Melting Machine

This Tooltos Digital Display Jewelry Casting Vacuum Melting Machine offers precision temperature control, thanks to the easy-to-read digital display and LED on/off indicator. It includes a complete set of accessories to get you started right away. Perfect for jewelry casting and gold melting. Accurate Pressure Gauge: Monitoring the current pressure helps you make relevant adjustments as needed to create a smooth surface. The cover shell made of metal features good durability. Smelt Quickly: The Gold Melting Furnace wire seal integrated machine can be heated and heated quickly. It can be heated up to 1150 ° C and can melt metals with melting points below 1150 ° C in 40 Minutes. Vacuum Hood: The vacuum hood made of thick aviation plastic is beneficial to reduce the burrs and bubbles produced. Application: Suit for making gold nuggets, ingots, or jewelry, smelting recycling scrap, refining jewelry, and casting all kinds of fast-melting metals, including gold, silver, lead, copper, brass, bronze, aluminum, etc. TIP: We would like to remind you that there is no vacuum pump in the unit and you will need to A vacuum pump of approx. 2 liters is required. Technical Parameters Voltage: 110V/220V Power: 2000W Maximum Temperature: 1250℃ Temperature Error: ±5℃ Working Environment Temperature：0-50℃，30-85%RH Steel bell: 3*6inch Graphite Crucible：1/2/3KG Product Size: 41.6cm ×36.5cm ×51cm Weight: about 21kg Package Included 1 x Smelt Vacuo Cast All-In-One 1 x 1/2/3KG Graphite Crucible 1 x Instruction Manual 1 x Crucible Pliers 1 x Gloves 1 x Rubber Base 1 x 3inch Steel Bell 1 x Vacuum Hood 1 x Hose+Air filter 1 x Graphite Gasket 1 x Rubber Gasket 1 x Power Cable How to cast a jewelry model 1. Put it into the vacuum hood. Able to reduce pores & burrs making it flawless 2. Replace the item in the 2L casting chamber. Inject the prepared molten iron 3. Cool down the model in the water and take out the semi-finished jewelry 4. Polish the item carefully, then beautiful jewelry is done. How to use melting 1. Plug in and turn on the switch 2. Put in the melt 3. Heat for 30 to 50 minutes (up to 1250°C) 4. Remove the melted liquid

• Note 1, Do not continuous melting casting, every two furnace interval time 40-50 minutes, the amount of more recommended to prepare several crucible rotation. 2, The melting point can not exceed 1100℃, commonly used precious metals are within this range, casting temperature can be set, according to the actual situation, do not exceed the melting point too much, so as not to increase unnecessary load. 3. Do not melt and cast metals with high impurities, such as sand gold. 4. Pour out immediately after melting