LED DRL Controller Car Daytime Running Light Relay Wire Harness Dimmer On/Off Fog Light Strobe Controller SK-CD0100 SK-CD0102(SK-CD0100)

Outlet & Switch CombosSpecification:SK-CD0100: Continuous flashingSK-CD0101: Flashes five times and then lights upSK-CD0102: Flashes four times for a short period of time and then stays onInput voltage: 12-24VOperating temperature: -40 to 50 degrees Storage temperature: -50 to 80 degrees High operating current: 2ADescription: Every time you brake, the high brake light will flash four times in succession, flash four times slowly and then turn to long light; the following vehicle warning function can try to avoid rear-end collisions. When driving at night, especially in traffic jams, frequent braking can cause visual fatigue, so this product can effectively solve this shortcoming.SK-CD0103 SK-CD0105Specification:Voltage: 12-18VWorking current: 5ASK-CD0103: 1. Delay function 2. Dimming of headlights and daytime running lightsSK-CD0105: 1. Delay function 2. Main light on, daytime running light off start: When the engine is started, the daytime running lights automatically light up; when the engine is turned off, the daytime running lights turn off with a delay of 15 seconds.instruct:This is a LED daytime running light hawk-eye light controller, always on + dimming + delay + automatic switch. When starting the car (voltage must be higher than 13V+), the daytime running light will automatically light up, and it can be used as a headlight (or reading) lights), daytime running lights dimming (dimming), when the car is turned off (voltage must be lower than 12.5V), the daytime running lights will turn on after a delay of 15 seconds.The starting voltage is 13V+, the extinguishing voltage is lower than 12.5V (if it is higher than this value, it will be extended for a few minutes until the voltage drops and then the lights are turned off). The total daily power of the driving lights does not exceed 18W (the total power of most daily driving lights will not exceed ).After just connecting the battery, the daytime running lights will come on for about 15 seconds and then turn off, which is normal (to implement the delay function). Then you need to start the car and start working when the voltage reaches 13V+.Intelligent work: When the car engine is started and the voltage reaches 13V+, the daytime running lights will automatically light up. When the car is turned off and the voltage is lower than 12.5V (not suitable for cars with a voltage higher than 12.5V after the car is turned off), the daytime running lights will delay for 15 seconds and automatically turn off. lamp, it is convenient for the owner of the lamp to go home and realize the delayed light turning off function.Connection method:1. First connect the positive and negative poles of the daytime running lights on both sides.2. Connect the fused input red and black wires on the controller to the positive and negative terminals of the battery, and connect the output red and black wires to the positive and negative terminals of the daytime running light.3. Connect the yellow wire on the controller to the positive pole of the headlight (or reading light) switch. When the headlight (or reading light) is turned on, the daily light intensity is halved (dimming) to realize the dimming function (you can choose not to connect the yellow wire, which means giving up this function and not affecting other uses).manifest:ControllerX1=========Features: Car LED DRL Controller Car Daytime Running Light RelayModel: SK-CD0100 SK-CD0102Material: plastic: Automotive LED DRL Controller Automotive Daytime Running Light Relaymaximum. Load power: 2AProduct Type: DimmerOrigin: Mainland China

• Outlet & Switch Combos