Phoenix Contact 8+1 Coupler Connector

This is a circular connector, designed for cable-side use, featuring an insulating body with a coding of 'N'. It's constructed with contact material CuZn and a contact surface material of Ni/Au, capable of withstanding 100 insertion/withdrawal cycles. The connection method is via solder, with a pin-type contact switching, suitable for signal applications. It has 9 positions, rotates in the standard direction, and follows an 8+1 connection profile. The first contact group has 1 pin, a 2 mm diameter, a maximum litz wire cross-section of 2.5 mm, a rated current of 20 A, and a rated voltage of 48 V AC (and 74 V DC). It also has a rated surge voltage of 1.5 kV, falls under overvoltage category III, and has a degree of pollution of 3. The second contact group has 8 pins, a 1 mm diameter, and a maximum litz wire cross-section of 1 mm. The nominal current per signal contact is 8 A. The housing is made of turned parts: copper zinc alloy (CuZn), and die-cast parts: zinc (GD-Zn), with a thread type of M23, a type of locking for standard and SPEEDCON interlock, and a Pg screw connection. It's rated IP67 for protection when plugged in, has an external cable diameter of 4 mm to 6 mm, and uses NBR for the seal material. It operates within an ambient temperature range of -40 C to 125 C. This connector ensures safe use in the field due to its high degree of protection, is ideal for flexible on-site assembly, provides consistent EMC protection, and uses a proven solder connection for various litz wires.